Name: Peel and stick waterproof dry back PVC herringbone LVT self adhesive vinyl tile/adhesive flooring - Rensino Flooring Co.,Ltd
SKU: AG-016

Rensino Flooring PRODUCTS



HOME > Vinyl Flooring > Peel and stick waterproof dry back PVC herringbone LVT self adhesive vinyl tile/adhesive flooring

Peel and stick waterproof dry back PVC herringbone LVT self adhesive vinyl tile/adhesive flooring

Vinyl flooring, also known as PVC flooring, is a very durable floor covering that mimics the look of natural materials and is available in a variety of designs and textures. It is suitable for high-traffic areas because it resists scratches, stains, and moisture. Vinyl flooring is soft underfoot, providing good comfort and reducing walking noise. In addition, this type of flooring is easy to install, low maintenance, and more cost-effective than other types of flooring, making it a popular choice for residential and commercial spaces.

+86-20-84044660

+86-20-84044660

[email protected]

MESSAGE

Floor assembly part

Floor color selection

Installation Diagram

PRODUCT DESCRIPTION

Peel and stick waterproof dry back PVC herringbone LVT self adhesive vinyl tile/adhesive flooring Measured and Test
Item		Reference /Standard	Standard Value	Remarks
Dimension Characteristic and Deviation Requirement
Dimension	Length	EN 649:2011 EN 427	+0.13%,一0.10%	Test on site
	Width		±0.20 mm
	Thickness	EN 649:2011 EN 428	Nominal value +0.13/-0.10 mm Average value±0.15 mm
Squareness		EN 649:2011 EN 427	≤0.35mm
Straightness			≤0.35mm
Height Difference		GB/T 4085 EN 649:2011	ha≤0.10mm,hmax≤0.15mm
Gapping			Oa≤0.10mm,Omax≤0.15mm
Physical Character
Gloss(60°Angle of Reflectance)	(Nominal Gloss Value≥15)		Target ±5	Test on site
	(Nominal Gloss Value ≤15)		Target±3
Gloss Retention Test	≤10	EN16094	Grade 1	Test in Lab
	11-30		Grade 2
	31-50		Grade 3
	51-70		Grade 4
	≥70		Grade 5
Dimensional Stability After Exposure to Heat		ISO23999	Heated to 65℃,≤0.15%
Curling After Exposure to Heat		ISO23999	Heated to 65℃,≤2mm
Abrasion Resistance (S42 sanding paper,200 cycle paper change,tested on smooth areas of the plank that are not heavily embossed)	Wear Layer Thickness 0.1mm	EN 13329	IP≥550 cycles
	Wear Layer Thickness 0.2mm		IP≥1000cycles
	Wear Layer Thickness 0.3mm		IP≥1800 cycles
	Wear Layer Thickness 0.5mm		IP≥4000 cycles
	Wear Layer Thickness 0.7mm		IP≥6000 cycles
Scratch resistance		EN 438-2:2016	no significant scratches in the appearance
Micro Scratch Resistance		EN16094	slight scratch mark
UV Coating Adhesion		ISO 2409	0 (Equal to 100%)
Mandrel Flexibility Test (for LVT)	Product thickness 5mm	ASTM F137-08	Pass 4 inches mandrel
	Product thickness 4mm		Pass 3 inches mandrel
	Product thickness 3mm or less		Pass 2 inches mandrel
Residual Indentation (average)		EN 649:2011 EN433	≤0.10 mm
Color Fastness		EN ISO 105-B02:2013	≥Grade 6
Stain Resistance		ISO 26987	Iodine,asphalt,mustard,shoeshine,mark pen,without clear stain residue
Coefficient of Friction(COF)/ADA Slip Resistance		ASTM C1028	≥0.5
Static Load		ASTM F970	≤0.04 inch
Castor chair test		EN 425:2002	no crack after 25000 revolution
Chemical Character and Toxic Element Limit
Heavy Metals (mg/Kg product)	Total Lead (Pb)	ASTM F963-11,CPSC- CH-E1002-08.3 section I.A	≤100	Test in Lab
	SOL.Lead (Pb)		≤90
	SOL.Mercury (Hg)		≤60
	SOL.Chromium (Cr)		≤60
	SOL.Arsenic (As)		≤25
	SOL.Antimony (Sb)		≤60
	SOL.Barium (Ba)		≤1000
	SOL.Selenium (Se)		≤500
	SOL.Cadmium(Cd)		≤75
TVOC (mg/m3)		CDPH Standard Method V1.1-2010	Per Section 4.0;CDPH Standard Method V1.1-2010
Formaldehyde emission(mg/m3)			Per Section 4.0;CDPH Standard Method V1.1-2010
Ortho-Phthalate Content(%w/w)	Dibutyl phthalate (DBP) Di(2-ethyl hexyl)phthalate (DEHP) Benzyl butyl phthalate (BBP)	CPSC-CH-C1001-09.3 with GC-MS analysis	Sum<0.1%w/w
	Di-ido-nonyl phthalate (DINP), DI-n-OCTYL-phthalate (DNOP) Di-ido-decyl phthalate (DIDP)		Sum<0.1%w/w
	DnHP(DHEXP),DIBP DnPP(DPENP),DCHP		Sum<0.1%w/w
Others
#Pieces /box		As per request	100%right	Test on site
SQFT /box
Qty (sqft/sqm2)on labels as caculation
Minimum Plank Length
Maximum Plank Length
Average Plank Length per Carton
Assemble samples with provided steel block			Matching
Long/Short Side Edge Profile		Profile Drawing Matching

PRODUCT WAREHOUSE

PACKING AND SHIPPING

FAQS

Q：How do you guarantee the quality of flooring products?

A：The quality control team strictly controls each step to ensure that all our products are great. Our products have warranty years.

Q: How about the delivery time?

A: The delivery time is 30 days since receiving the deposit payment. (Samples will be ready within 5 days.)

Q: What flooring products do you have, do you also provide other flooring accessories?

A: Yes. Our products vinyl flooring, laminate flooring, LVT flooring, SPC flooring, etc. We also provide flooring related accessories and other decorative materials.

Q: Do you charge sample fee?

A: According to our company policy, we provide free samples, but the freight needs to be paid by customers.

Q: Can you produce according to customer's design?

A: Of course, we are a professional manufacturer, welcome OEM and ODM.